You can see where 3D scanning could help. How do you turn that opportunity into a proposal your colleagues can support? Start with the work you need to improve, then bring together the evidence, costs and people needed to make it happen.

Perhaps you have seen a demonstration that could change how your team measures a difficult component. Or you are spending too much time recreating geometry, moving parts to inspection or waiting for results. The potential is clear to you. The next step is explaining it to the people who will help approve the investment.

A business case for a 3D scanner connects that potential to everyday work. It gives engineering, quality, operations and finance a shared view of what could improve, what it would take and how the benefits would be realised.

You can begin before a purchase is imminent. Building the case helps identify which questions to explore next, whether you are preparing a proposal now or planning a future budget.

Start with the job you want to improve

Choose an application your colleagues will recognise. It could be inspecting a recurring component, investigating variation across a larger surface or creating CAD from parts without suitable drawings.

Describe the difficulty and its consequence. “We spend time measuring this part” gives little context. Explaining that an engineer waits for the result before adjusting a tool makes the opportunity easier to understand. For reverse engineering, the value might be giving a designer a measured starting point and reducing the effort involved in rebuilding geometry.

Keep the first application specific. Once it is understood, you can consider where else the workflow might help and which additional uses need investigating.

Build a picture of the current process

Follow a few representative jobs through your existing method. Include preparation, transport, measurement, processing and review. Record the hands-on time as well as the waiting between stages; those are different opportunities for improvement.

Existing job records, inspection requests and external service invoices can provide a starting point. Conversations with the people doing the work help explain what the records miss, such as repeated setups or time spent asking for additional measurements.

Frequency matters too. A recurring task gives you a different basis for investment from an occasional project. Separate work you already have from expected future demand, so colleagues can see how much of the case rests on each.

Use a demonstration to gather evidence for the proposal

A test on a representative component gives you something concrete to discuss. The most helpful demonstration follows the job far enough to show the output your team needs, such as an inspection report, a surface comparison or usable CAD.

Look at the complete route to that output. For inspection, this includes the relevant checks and measurement capability under the intended working conditions. For scan-to-CAD work, include modelling and an opportunity to use the result in your design software.

Involve the people who will operate the workflow and use its results. Their questions often reveal what matters in practice: how a component is located, how much training is needed, or whether a report gives production enough information to act. Record what the test demonstrated and what still needs resolving.

Explain what the benefit would mean in practice

Time released from routine work can be valuable even when staffing costs stay the same. It may give an engineer capacity for investigations, help the team absorb more work or reduce a recurring queue. Explain where that capacity would go.

For illustration only, assume a proposed workflow releases one operator hour per job and is used for ten jobs a month. Across twelve months, that represents 120 hours of capacity. These are example assumptions to replace with your own measured timings and expected workload; they are not a forecast of scanner performance.

Those hours become a cash saving only where spending actually reduces, for example through less paid overtime or fewer external measurement jobs. Treat released capacity and reduced spending separately, and avoid counting the same benefit twice.

Earlier feedback may also help teams respond before more work is affected. Where you have records of rework or delayed decisions, use them to explore that opportunity. Describe less measurable benefits clearly, while keeping them separate from confirmed financial savings.

Budget for the workflow around the scanner

The equipment price is one part of the investment. Depending on the application, you may also need inspection or reverse engineering software, a suitable computer, fixtures, accessories and training. An automated routine may involve programming and additional integration work.

Allow for the internal time needed to introduce the process and bring colleagues up to speed. Include relevant recurring costs such as software subscriptions or maintenance, calibration, consumables and support. A clear supplier quotation helps establish what is included and what needs a separate allowance.

It is also useful to compare the proposal with continuing the current method or using an external scanning service. This helps colleagues judge whether ownership suits the expected workload and how quickly the capability needs to be available.

Show how the investment will become everyday capability

A proposal becomes more convincing when people can see how it will be used. Identify who will learn the system, maintain measurement routines or CAD workflows, and support colleagues when an unfamiliar job arrives.

Set out a manageable introduction: the first application, training, a period of supported use and a review of results. Consider what the case looks like if adoption takes longer or workload is lower than expected. This gives the team a realistic basis for planning and highlights where support could make the biggest difference.

Bring the evidence together

Your internal proposal can begin with a concise summary supported by the detail you have gathered. Use this checklist to see what you already know and where the next conversation would help.

  • The application and the result your team needs.
  • The current method, workload, effort and delays.
  • Demonstration findings and any questions still open.
  • Expected benefits, with evidence and assumptions identified.
  • Purchase, implementation and recurring costs.
  • The people, training and support needed to run the workflow.
  • The proposed timing and how success will be reviewed.

Let’s explore what the investment could mean for your business

You don’t need every answer before speaking to us. Share the application you have in mind, the challenges in your current process and what you would like to improve.

Our team can work through the potential longer-term benefits with you, using your workload, costs and priorities to explore the return on investment. Alongside a representative-part demonstration, this can help you build a clearer picture of the operational and financial value—and bring a more informed proposal to your colleagues.

Need More Information?

Click here to speak to a T3DMC expert

Get Expert Advice When You Need It

In a rush? Call us, we’re ready to help.

Stay Ahead of Measurement Challenges

Real-world measurement insights, not sales emails.

Privacy Preference Center